In most cases, signs that you need to replace electrical wiring in your home are very easy to see. For instance, you may notice loose wires and damaged insulation. In most scenarios, it is easy to identify damaged wiring by looking at the wires’ appearance. If you have damaged insulation, you would not be able to use your current wiring until you can get replacement blankets or insulation.

Even in areas that appear to be fairly well insulated, you may have insulation issues. For example, if you live in a basement, there may be a problem with water seeping through the floorboard. While it is unlikely, this is a possibility. The moisture may be getting in because the wooden framing has buckled due to age, and it may be destroying the wiring.

Before getting to know various signs to replace wiring, let’s first check some related details:

Who is Responsible for an Electric Line to the House in the UK?

This question usually comes up when there are problems with electrical lines. Before you do anything, make sure that you are safe and that you know where the lines are that you have. Calling an electrician would turn out to be a good idea before trying to fix the problem yourself.

Read more about our Domestic Electrical Services in Leicestershire

The answer to the same relies on the situation. It may depend on:

  • The capacity and type of electrical service you are using. 
  • The electrical supply is offered by commercial, industrial, or residential societies.
  • The policies and laws explaining utilities where you are located.

Why Are Electric Wires Covered with Plastic?

The reason is that plastic is a good conductor of electricity, as it can hold on to a large number of volts, and in turn, can carry lots of current, which makes it very useful for conducting any electrical current. 

Plastic is used because it is quite inexpensive and is available in most local hardware stores. The reason why they are coated with plastic is that it gives the wires a finished look. Although it cannot stop lightning from hitting your home, it will reduce the damage that it would otherwise do.

Why are electric wires coated in plastic? It protects them against damage, it makes them visually appealing, it stops static from building up, and it aids in the maintenance of the electrical equipment you use. Plastic is also a very suitable material to work with, and it can be cut and formed into just about any shape, which makes it ideal for electrical wiring.

Why are Electric Wires Coated with PVC?

The first question one would ask when thinking about why electric wires are coated with PVC is why such an important part is building material. There are several reasons why this coating was designed and used for the insulation of wires. 

Some of the reasons they use PVC for protection are that they are highly conductive of electricity compared to other materials that they are manufactured with, like steel or copper. This makes them highly resistant to damage from the weather too.

PVC helps make the coating rust proof. The PVC coating helps prevent the oxidation of the wire inside the device. If the wire is exposed to fire or other hazardous materials are exposed to these elements, it will be protected and prevent it from rusting. Thus, it becomes a more durable wire.

How Long Does Electrical Wiring Last?

There remains a lot of misconceptions about how long does electrical wiring last. Electrical wiring is a very sensitive and very important part of a home or office in the UK. It is used for many different things such as lighting, heating, ventilation, etc. If you have ever had a power outage in your home, you know how short or long the outage can last. Electrical wiring has to be constantly maintained and replaced from time to time.

The durability of electrical wiring depends on several factors? The quality of the wiring will affect how long it lasts but also how well it is maintained. Poorly maintained wiring will eventually wear out and need to be replaced. Another factor that affects how long it lasts is how well it is installed. A poorly installed wiring system will not only wear out over time but will also create a hazard to those that are around the home. 

Usually, wiring lasts for decades, and it is advisable to replace or re-wire every five years. Though, as per a general rule, electrical wiring can sustain past 50 years.

WHEN TO REPLACE ELECTRICAL WIRING IN YOUR HOME IN THE UK?

Check for the following aspects if you intend to notice the signs that your home needs a wiring replacement:

  1. Aging Wires & Connections

It is also possible that wires have been frayed due to age, and they are leaking. In many older homes, electricity may be conducted through flammable materials, which can be very dangerous. Older homes are generally at risk for electrical problems, and you should always take precautions.

  1. Inefficiently Working Fuse Box

If you do reside in an older house, the chances are that the electrical wiring may not be as up-to-the-mark as you would like. There may even be problems with fuse wear. The fuse box is the place you will want to check first. Sometimes this is the only way to tell whether the fuse box is not working properly. Signs that you need to replace electrical wiring in your home can be found in many places.

  1. Untreated Exposed Wires

One of the apt places to look for signs that you need to replace electrical wiring in your home is your home’s basement. Bunkers and storage spaces beneath the floors can become a source of electrical problems. There can be shorts, and there may even be exposed wire. It proves to be imperative that you thoroughly inspect any basement areas that may contain electrical wiring. You can utilise a flashlight to inspect the area or do it using a special electrical-wiring inspection tool.

  1. Blown Out Fuses and Breakers 

The first aspect that you require to do when replacing electrical wiring in our house is to complete the wiring system. Is there any fuse that has blown out? If you cannot find the exact location of the blown fuse, look for its neighbors. In case multiple fuses are blowing, it’s probably time to replace the electrical wiring.

  1. Cracked & Damaged Insulation

The insulation on the wires also affects their lifespan. Insulation makes the wires conductive so that they don’t wear out easily. If the insulation is cracked or damaged, the wires will lose their conductivity and start to wear out soon. When to replace electrical wiring in our house depends on whether you want your wires to look new or want them to last longer. For sure, you would prefer to replace them when they look new.

SUMMING UP

Signs that you need to replace electrical wiring in your home will probably appear when you notice a serious problem with the wiring. It would be apt if you never tried to fix something that you do not fully understand. It proves to be better to err on the side of replacing than it is to repair. Keep in mind that your safety is also important when you are working with electrical equipment.

For any kind of electrical services across Leicestershire, connect with C&M Electrical Contractors. We have a team of experienced electrical contractors and we provide a huge range of electrical services from house rewiring to EICR for homes and businesses at the best price. Providing quality and excellence in work is our priority. Replacement of electrical wiring in your home can be made easy and safe with us.

Related Articles

In most cases, signs that you need to replace electrical wiring in your home are very easy to see. For instance, you may notice loose wires and damaged insulation. In most scenarios, it is easy to identify damaged wiring by looking at the wires’ appearance. If you have damaged insulation, you would not be able to use your current wiring until you can get replacement blankets or insulation.

Even in areas that appear to be fairly well insulated, you may have insulation issues. For example, if you live in a basement, there may be a problem with water seeping through the floorboard. While it is unlikely, this is a possibility. The moisture may be getting in because the wooden framing has buckled due to age, and it may be destroying the wiring.

Before getting to know various signs to replace wiring, let’s first check some related details:

Who is Responsible for an Electric Line to the House in the UK?

This question usually comes up when there are problems with electrical lines. Before you do anything, make sure that you are safe and that you know where the lines are that you have. Calling an electrician would turn out to be a good idea before trying to fix the problem yourself.

Read more about our Domestic Electrical Services in Leicestershire

The answer to the same relies on the situation. It may depend on:

  • The capacity and type of electrical service you are using. 
  • The electrical supply is offered by commercial, industrial, or residential societies.
  • The policies and laws explaining utilities where you are located.

Why Are Electric Wires Covered with Plastic?

The reason is that plastic is a good conductor of electricity, as it can hold on to a large number of volts, and in turn, can carry lots of current, which makes it very useful for conducting any electrical current. 

Plastic is used because it is quite inexpensive and is available in most local hardware stores. The reason why they are coated with plastic is that it gives the wires a finished look. Although it cannot stop lightning from hitting your home, it will reduce the damage that it would otherwise do.

Why are electric wires coated in plastic? It protects them against damage, it makes them visually appealing, it stops static from building up, and it aids in the maintenance of the electrical equipment you use. Plastic is also a very suitable material to work with, and it can be cut and formed into just about any shape, which makes it ideal for electrical wiring.

Why are Electric Wires Coated with PVC?

The first question one would ask when thinking about why electric wires are coated with PVC is why such an important part is building material. There are several reasons why this coating was designed and used for the insulation of wires. 

Some of the reasons they use PVC for protection are that they are highly conductive of electricity compared to other materials that they are manufactured with, like steel or copper. This makes them highly resistant to damage from the weather too.

PVC helps make the coating rust proof. The PVC coating helps prevent the oxidation of the wire inside the device. If the wire is exposed to fire or other hazardous materials are exposed to these elements, it will be protected and prevent it from rusting. Thus, it becomes a more durable wire.

How Long Does Electrical Wiring Last?

There remains a lot of misconceptions about how long does electrical wiring last. Electrical wiring is a very sensitive and very important part of a home or office in the UK. It is used for many different things such as lighting, heating, ventilation, etc. If you have ever had a power outage in your home, you know how short or long the outage can last. Electrical wiring has to be constantly maintained and replaced from time to time.

The durability of electrical wiring depends on several factors? The quality of the wiring will affect how long it lasts but also how well it is maintained. Poorly maintained wiring will eventually wear out and need to be replaced. Another factor that affects how long it lasts is how well it is installed. A poorly installed wiring system will not only wear out over time but will also create a hazard to those that are around the home. 

Usually, wiring lasts for decades, and it is advisable to replace or re-wire every five years. Though, as per a general rule, electrical wiring can sustain past 50 years.

WHEN TO REPLACE ELECTRICAL WIRING IN YOUR HOME IN THE UK?

Check for the following aspects if you intend to notice the signs that your home needs a wiring replacement:

  1. Aging Wires & Connections

It is also possible that wires have been frayed due to age, and they are leaking. In many older homes, electricity may be conducted through flammable materials, which can be very dangerous. Older homes are generally at risk for electrical problems, and you should always take precautions.

  1. Inefficiently Working Fuse Box

If you do reside in an older house, the chances are that the electrical wiring may not be as up-to-the-mark as you would like. There may even be problems with fuse wear. The fuse box is the place you will want to check first. Sometimes this is the only way to tell whether the fuse box is not working properly. Signs that you need to replace electrical wiring in your home can be found in many places.

  1. Untreated Exposed Wires

One of the apt places to look for signs that you need to replace electrical wiring in your home is your home’s basement. Bunkers and storage spaces beneath the floors can become a source of electrical problems. There can be shorts, and there may even be exposed wire. It proves to be imperative that you thoroughly inspect any basement areas that may contain electrical wiring. You can utilise a flashlight to inspect the area or do it using a special electrical-wiring inspection tool.

  1. Blown Out Fuses and Breakers 

The first aspect that you require to do when replacing electrical wiring in our house is to complete the wiring system. Is there any fuse that has blown out? If you cannot find the exact location of the blown fuse, look for its neighbors. In case multiple fuses are blowing, it’s probably time to replace the electrical wiring.

  1. Cracked & Damaged Insulation

The insulation on the wires also affects their lifespan. Insulation makes the wires conductive so that they don’t wear out easily. If the insulation is cracked or damaged, the wires will lose their conductivity and start to wear out soon. When to replace electrical wiring in our house depends on whether you want your wires to look new or want them to last longer. For sure, you would prefer to replace them when they look new.

SUMMING UP

Signs that you need to replace electrical wiring in your home will probably appear when you notice a serious problem with the wiring. It would be apt if you never tried to fix something that you do not fully understand. It proves to be better to err on the side of replacing than it is to repair. Keep in mind that your safety is also important when you are working with electrical equipment.

For any kind of electrical services across Leicestershire, connect with C&M Electrical Contractors. We have a team of experienced electrical contractors and we provide a huge range of electrical services from house rewiring to EICR for homes and businesses at the best price. Providing quality and excellence in work is our priority. Replacement of electrical wiring in your home can be made easy and safe with us.

Related Articles

Old wiring can cause serious fire hazards and lead to injuries caused by electrocution. If you are looking to buy a house or a property that is more than 25 years old, then it is important to check that the electrical wiring is up to date.

The old wiring may prove to be dangerous and the demands of modern living may not be met with it.

Rewiring a home can cost a lot from 2,000 pounds to 5,000 pounds for an average house. And, the cost is not the only consideration. Rewiring a home will definitely cause some disruption, including the need to replaster walls after the work is finished.

Rewiring can be a difficult task. Be that as it may, old electrics can be hazardous and are the reason for fires, accidents, and deaths in the home every year. So, it isn’t something you should put off if you think it needs to be carried out. Examine the signs, and in case you’re concerned, have an electrical review done.

How to tell if your home needs rewiring

Persistent burning smell

If you sense a burning a smell and you haven’t burnt your food and the smell doesn’t go away, then it might be that your house needs rewiring. If you can identify the source of burning, turn off the power at the circuit and call an electrician immediately.

The odour is a distinctive smell of an electrical burn which is identical to that of fish.

Charred or discolored sockets or switches

Grey or brown marks on electrical sockets can be the result of tiny fires caused by loose wire connections inside the socket. This can cause little arcs of electricity and fire. Also, the absence of scorch marks doesn’t really mean that there is no problem. The arcing could be occurring in the wiring within the walls, which may not be noticeable on sight until an electrical inspection is done.

Flickering or dimming lights

If a light bulb is flickering or dimming it will be considered as a faulty bulb. On the other hand, there could be an electrical issue if you see that the lights in the other rooms are also flickering regularly. This needs to checked urgently.

Repeatedly blowing fuses

If the fuses blow regularly and randomly, this could be a sign that your house needs rewiring. However, it could simply be a defective electric appliance that is causing the problem. Be cautious though when it repeatedly happens and you can’t identify the faulty appliance, contact an electrician to have it checked out.

Hanging sockets

Hanging sockets will expose the wires and this can be very dangerous, especially if you have children or pets. Get an electrician to repair the socket and check the whole system quickly.

Electric shocks

If you get shocked by electricity, however small the impact was, when plugging in an appliance into the socket, then it needs to be checked urgently. Also, if there is a buzzing sound from a socket, get the electrician to check it out.

An old house

If your house is more than 25 years old and you’re not sure if it has been rewired, or if the switches, sockets, and fuse boxes are old. You should get an electrician to have it checked.

Electrical installation should be tested every 10 years if you own a home, and every 5 years if you rent a home.

What to expect during a rewiring process?

Are you planning for a renovation? Most probably rewiring of all or a part of your property may be needed. Building Regulations BS 7671, also referred to as the IET Wiring Regulations, should be followed by Electrical installations. This sets the principles for installation of the electricals in the UK. On the off chance that you are extending your home or changing over the garage or loft, all the new wiring will require to adjust to the most recent Building Regulations, and the current installations are upgraded to securely convey the extra load.

The rewiring process will be messy if you are living on the property. The process can be invasive and take between 5-8 days. A team of qualified electricians will be working in your home, starting at the roof working down.

You can minimize the mess when there is a clear understanding of your requirements at the outset, regular consultations, and open communication.

Moreover, it is fundamental that you plan this out cautiously, as circuit testers will frequently work quicker in an empty, calm environment, which implies you should be ready for all conditions. Additionally, your area in the UK can likewise affect the general expense on account of the regional contrasts in professionals’ costs.

Quite possibly the main thing to comprehend about rewiring is what constitutes a full house rewire, as there will be changes in sockets and cables just as wires. 

A full house overhaul is comprised of two phases: the main phase is typically finished before walls are placed and should be done without furniture or rugs in place, so on the off chance that you are moving into another property, we would advise that you have the property revamped before adding furniture, to dodge any future issues.

The subsequent phase is known as the “Second Fix” which is for the most part comprised of interfacing the electrics by fitting the switches, attachments, and lights. A fuse box/ consumer unit will likewise be connected.

Rewiring is a process to improve safety as well as present-day convenience – to add more switches and fittings for kitchen machines, home PCs, and TVs. In the event that you are selling an older property, a new overhaul can boost its appeal to purchasers.

In conclusion, as rewiring is a complex and conceivably risky work if done unprofessionally, it is crucial to use the right people for the job.

Request to see an electrician’s qualifications and verify whether they are enrolled with an association, for example, NICEIC or ELECSA. Additionally, get them to show you their public risk insurance so you have peace of mind that cover is there should anything turn out badly.

If you are a landlord or an estate agent and are looking for tailored electrical service in and across Leicestershire the C&M Electricals is the name you can trust on. We deal in various electrical services right from a minor maintenance work to rewiring to electrical installations etc.

Feel free to contact us for any kind of electrical work in a residential property or an industrial property.

Related Articles

Old wiring can cause serious fire hazards and lead to injuries caused by electrocution. If you are looking to buy a house or a property that is more than 25 years old, then it is important to check that the electrical wiring is up to date.

The old wiring may prove to be dangerous and the demands of modern living may not be met with it.

Rewiring a home can cost a lot from 2,000 pounds to 5,000 pounds for an average house. And, the cost is not the only consideration. Rewiring a home will definitely cause some disruption, including the need to replaster walls after the work is finished.

Rewiring can be a difficult task. Be that as it may, old electrics can be hazardous and are the reason for fires, accidents, and deaths in the home every year. So, it isn’t something you should put off if you think it needs to be carried out. Examine the signs, and in case you’re concerned, have an electrical review done.

How to tell if your home needs rewiring

Persistent burning smell

If you sense a burning a smell and you haven’t burnt your food and the smell doesn’t go away, then it might be that your house needs rewiring. If you can identify the source of burning, turn off the power at the circuit and call an electrician immediately.

The odour is a distinctive smell of an electrical burn which is identical to that of fish.

Charred or discolored sockets or switches

Grey or brown marks on electrical sockets can be the result of tiny fires caused by loose wire connections inside the socket. This can cause little arcs of electricity and fire. Also, the absence of scorch marks doesn’t really mean that there is no problem. The arcing could be occurring in the wiring within the walls, which may not be noticeable on sight until an electrical inspection is done.

Flickering or dimming lights

If a light bulb is flickering or dimming it will be considered as a faulty bulb. On the other hand, there could be an electrical issue if you see that the lights in the other rooms are also flickering regularly. This needs to checked urgently.

Repeatedly blowing fuses

If the fuses blow regularly and randomly, this could be a sign that your house needs rewiring. However, it could simply be a defective electric appliance that is causing the problem. Be cautious though when it repeatedly happens and you can’t identify the faulty appliance, contact an electrician to have it checked out.

Hanging sockets

Hanging sockets will expose the wires and this can be very dangerous, especially if you have children or pets. Get an electrician to repair the socket and check the whole system quickly.

Electric shocks

If you get shocked by electricity, however small the impact was, when plugging in an appliance into the socket, then it needs to be checked urgently. Also, if there is a buzzing sound from a socket, get the electrician to check it out.

An old house

If your house is more than 25 years old and you’re not sure if it has been rewired, or if the switches, sockets, and fuse boxes are old. You should get an electrician to have it checked.

Electrical installation should be tested every 10 years if you own a home, and every 5 years if you rent a home.

What to expect during a rewiring process?

Are you planning for a renovation? Most probably rewiring of all or a part of your property may be needed. Building Regulations BS 7671, also referred to as the IET Wiring Regulations, should be followed by Electrical installations. This sets the principles for installation of the electricals in the UK. On the off chance that you are extending your home or changing over the garage or loft, all the new wiring will require to adjust to the most recent Building Regulations, and the current installations are upgraded to securely convey the extra load.

The rewiring process will be messy if you are living on the property. The process can be invasive and take between 5-8 days. A team of qualified electricians will be working in your home, starting at the roof working down.

You can minimize the mess when there is a clear understanding of your requirements at the outset, regular consultations, and open communication.

Moreover, it is fundamental that you plan this out cautiously, as circuit testers will frequently work quicker in an empty, calm environment, which implies you should be ready for all conditions. Additionally, your area in the UK can likewise affect the general expense on account of the regional contrasts in professionals’ costs.

Quite possibly the main thing to comprehend about rewiring is what constitutes a full house rewire, as there will be changes in sockets and cables just as wires. 

A full house overhaul is comprised of two phases: the main phase is typically finished before walls are placed and should be done without furniture or rugs in place, so on the off chance that you are moving into another property, we would advise that you have the property revamped before adding furniture, to dodge any future issues.

The subsequent phase is known as the “Second Fix” which is for the most part comprised of interfacing the electrics by fitting the switches, attachments, and lights. A fuse box/ consumer unit will likewise be connected.

Rewiring is a process to improve safety as well as present-day convenience – to add more switches and fittings for kitchen machines, home PCs, and TVs. In the event that you are selling an older property, a new overhaul can boost its appeal to purchasers.

In conclusion, as rewiring is a complex and conceivably risky work if done unprofessionally, it is crucial to use the right people for the job.

Request to see an electrician’s qualifications and verify whether they are enrolled with an association, for example, NICEIC or ELECSA. Additionally, get them to show you their public risk insurance so you have peace of mind that cover is there should anything turn out badly.

If you are a landlord or an estate agent and are looking for tailored electrical service in and across Leicestershire the C&M Electricals is the name you can trust on. We deal in various electrical services right from a minor maintenance work to rewiring to electrical installations etc.

Feel free to contact us for any kind of electrical work in a residential property or an industrial property.

Related Articles

Electrical fittings are very important aspects to put in place when one is deciding on how best to carry out his interior decoration when he just moves into a new apartment or building. It is not only limited to just new occupants of a building but also to people who have decided to make a revamp of their interior decoration. When deciding on how you intend to arrange and fix your electrical lighting fittings in your home, you should bear in mind that you are about to showcase your stylishness and decoration sense. This is why it is important to know the different kinds of lights, where they fit into, and how they should be fixed to lighten up every aspect of your building. In this piece, we have taken our time to put together a simple but extensive guide on how best to make sure that your electrical lighting fittings at home are done in a proper way to lighten up your entire house.

Types of electrical light fittings for the home

When deciding on what type lighting or lighting fittings to use in your home, you should pay attention to the direction in which the door opens, where the windows, stairs, and fireplace are positioned. When these and other factors are put into consideration, you can easily decide if you just need a little more lighting or you have to install lighting that makes the room bright. Below are the different kinds of electrical fitting available to anyone who is trying to decide on how best to lighten his/her house.


Fixed electrical light fittings
It Can also be called Ambient, this light makes the room they are fixed feel as close to daylight as possible. The ambient light fixture when installed in a room lightens upmost part of the room to allow easy movement in and around the room. Examples of this kind of light fixture include;
Ceiling Dome/pendant lamp: like the name implies, this type of fixed lighting fittings hangs from the ceiling and dangles like a pendant does on a necklace. It is mostly placed in the middle of the room to give a clear focal point in the room examples include the chandeliers, shades, etc.
Outdoor lighting: this covers the aspect of security or having a cool and nice time in the backyard. They are usually of different brightness or dimness depending on what part you are placing them. Lights like the floodlights and halogen are usually used for the security light, while dimmer and cooler lights are fixed if they are to be fixed in the backyard for a cozy scenario.
Recessed light: unlike the pendant lamp, the recessed lights are fixed into the ceiling or other surface. When well arranged, they light up a room in a decorative way and light up the room with no central focal point. When choosing a recessed light, it is important to note that you are going to have to install more than one in a room to clearly light up the room.
Surface-mounted light: the surface mounted light is a combination of both the recessed and ceiling dome light. They are less conspicuous than the pendant lamp but more visible than the recessed light which makes it a hybrid kind of lamp. 


Free-standing light fittings
the free-standing lights act like complementary lights that help to light up the aspect of the house where the fixed lighting fixture fails to light up clearly. They provide a general lighting to the parts of the house that lights barely illuminate. Types of this kind of electrical fittings include the following.
Floor lamps and Table lamps: the floor and table lamps are essentially back-up lights to the main light. They are used to lighten up the dark corners of the house while also acting as a decorative measure to brighten up and style your home.
-Nightlight: this is usually a small light fixture that is placed in areas that might become are at a specific period. They are usually placed in spots to create comfort or convenience and also lighten up a small area of the room. The nightlight is used in places like the kids bedroom and to mark an emergency exit.


Special purpose lighting fixture
The special purpose lighting fixture is also known as the task light, and as it implies, they are placed to assist one in completing or carrying out a specific function in the home. Some of the task light can also be categorised under the free-standing light fittings. Other kinds of task lights include the flood light, background light, Christmas light, and Black light

Specific rooms and their advised electrical lighting fittings
Kitchen: the lighting of the kitchen is very complex but with the aid of a recessed/surface mounted lights coupled with special purposed lights would do the magic of lighting up your kitchen.
Entryway: you can never go wrong using a pendant light/chandelier; you can complement that light with table or floor lamps.
Living room: with the need for the living room to be brightly lit up, the living room hence, a combination of multiple recessed lights, a center placed pendant lights and table/floor lights depending on the style and arrangement you have chosen.
Bedroom: the bedroom needs a less harsh lighting up therefore, with the aid of an overhead light source like the surface mounted light coupled with a table lamp or a nightlight you can easily setup a cool, stylish, and cozy bedroom.
Bathroom: the bathroom needs a bright clear light and to do so, you need lights like a dome or recessed light, add a wall mounted light close to the mirror to help with looking at one’s reflection in the mirror.
Dining: one of the simplest rooms in the home to light up is the dinning. The main light that lights up the room should come from a center ceiling dome like the chandelier. Then extra free-standing lights can be used to light up dark areas not lit up by the ceiling dome placed above the dining table.

In conclusion, with the right amount of lighting in the home, the beauty and stylishness of the home can be enhanced. Knowing and having an idea of the style and outlay you intend to use when setting up or revamping your home would help in deciding which electrical lighting fixture you would want to use. C&M electrical contractors can help you lighten up your home the way you like it. We strive to give you quality work. Our team of professional is highly experienced and all the electricians are NICEIC approved. If you are looking to get your work done from the most reliable electrical contractors, then we are the ones. Experience a premium electrical service by Leicester based electrical contractors.

Related Articles

Electrical fittings are very important aspects to put in place when one is deciding on how best to carry out his interior decoration when he just moves into a new apartment or building. It is not only limited to just new occupants of a building but also to people who have decided to make a revamp of their interior decoration. When deciding on how you intend to arrange and fix your electrical lighting fittings in your home, you should bear in mind that you are about to showcase your stylishness and decoration sense. This is why it is important to know the different kinds of lights, where they fit into, and how they should be fixed to lighten up every aspect of your building. In this piece, we have taken our time to put together a simple but extensive guide on how best to make sure that your electrical lighting fittings at home are done in a proper way to lighten up your entire house.

Types of electrical light fittings for the home

When deciding on what type lighting or lighting fittings to use in your home, you should pay attention to the direction in which the door opens, where the windows, stairs, and fireplace are positioned. When these and other factors are put into consideration, you can easily decide if you just need a little more lighting or you have to install lighting that makes the room bright. Below are the different kinds of electrical fitting available to anyone who is trying to decide on how best to lighten his/her house.


Fixed electrical light fittings
It Can also be called Ambient, this light makes the room they are fixed feel as close to daylight as possible. The ambient light fixture when installed in a room lightens upmost part of the room to allow easy movement in and around the room. Examples of this kind of light fixture include;
Ceiling Dome/pendant lamp: like the name implies, this type of fixed lighting fittings hangs from the ceiling and dangles like a pendant does on a necklace. It is mostly placed in the middle of the room to give a clear focal point in the room examples include the chandeliers, shades, etc.
Outdoor lighting: this covers the aspect of security or having a cool and nice time in the backyard. They are usually of different brightness or dimness depending on what part you are placing them. Lights like the floodlights and halogen are usually used for the security light, while dimmer and cooler lights are fixed if they are to be fixed in the backyard for a cozy scenario.
Recessed light: unlike the pendant lamp, the recessed lights are fixed into the ceiling or other surface. When well arranged, they light up a room in a decorative way and light up the room with no central focal point. When choosing a recessed light, it is important to note that you are going to have to install more than one in a room to clearly light up the room.
Surface-mounted light: the surface mounted light is a combination of both the recessed and ceiling dome light. They are less conspicuous than the pendant lamp but more visible than the recessed light which makes it a hybrid kind of lamp. 


Free-standing light fittings
the free-standing lights act like complementary lights that help to light up the aspect of the house where the fixed lighting fixture fails to light up clearly. They provide a general lighting to the parts of the house that lights barely illuminate. Types of this kind of electrical fittings include the following.
Floor lamps and Table lamps: the floor and table lamps are essentially back-up lights to the main light. They are used to lighten up the dark corners of the house while also acting as a decorative measure to brighten up and style your home.
-Nightlight: this is usually a small light fixture that is placed in areas that might become are at a specific period. They are usually placed in spots to create comfort or convenience and also lighten up a small area of the room. The nightlight is used in places like the kids bedroom and to mark an emergency exit.


Special purpose lighting fixture
The special purpose lighting fixture is also known as the task light, and as it implies, they are placed to assist one in completing or carrying out a specific function in the home. Some of the task light can also be categorised under the free-standing light fittings. Other kinds of task lights include the flood light, background light, Christmas light, and Black light

Specific rooms and their advised electrical lighting fittings
Kitchen: the lighting of the kitchen is very complex but with the aid of a recessed/surface mounted lights coupled with special purposed lights would do the magic of lighting up your kitchen.
Entryway: you can never go wrong using a pendant light/chandelier; you can complement that light with table or floor lamps.
Living room: with the need for the living room to be brightly lit up, the living room hence, a combination of multiple recessed lights, a center placed pendant lights and table/floor lights depending on the style and arrangement you have chosen.
Bedroom: the bedroom needs a less harsh lighting up therefore, with the aid of an overhead light source like the surface mounted light coupled with a table lamp or a nightlight you can easily setup a cool, stylish, and cozy bedroom.
Bathroom: the bathroom needs a bright clear light and to do so, you need lights like a dome or recessed light, add a wall mounted light close to the mirror to help with looking at one’s reflection in the mirror.
Dining: one of the simplest rooms in the home to light up is the dinning. The main light that lights up the room should come from a center ceiling dome like the chandelier. Then extra free-standing lights can be used to light up dark areas not lit up by the ceiling dome placed above the dining table.

In conclusion, with the right amount of lighting in the home, the beauty and stylishness of the home can be enhanced. Knowing and having an idea of the style and outlay you intend to use when setting up or revamping your home would help in deciding which electrical lighting fixture you would want to use. C&M electrical contractors can help you lighten up your home the way you like it. We strive to give you quality work. Our team of professional is highly experienced and all the electricians are NICEIC approved. If you are looking to get your work done from the most reliable electrical contractors, then we are the ones. Experience a premium electrical service by Leicester based electrical contractors.

Related Articles

Rewiring a house in Leicestershire is a comprehensive job that requires certified and trustworthy electricians. With that in mind, most homeowners want to know how much it really costs to rewire their entire home.

While the question is straightforward, the answer is far from that assumption. Rewiring your entire home is a big job that requires a significant and adequate budget to get done professionally.

Moreover, there isn’t a standard amount of how much it really costs to rewire your entire Leicestershire home. That’s because all houses are not the same, which means that the total amount needed to rewire an entire house in Leicestershire varies from house to house.

Factors that Affect the Costs of Rewiring a House in Leicestershire

As explained earlier, there are different factors that will affect the cost of rewiring your house. Such factors include the size of your house, needed upgrades, and the material costs, among other essentials things.

Here, we look at some of the most common factors that determine the final budget of how much it really costs to rewire an entire house in Leicestershire. That’s said, below are the cost factors that impact home rewiring:

The Size of Your Home

This is the first and most significant factor when it comes to the budget needed to rewire your home. The square footage of your home must, in one way or the other impact the total costs of rewiring it. First, a large house will ultimately have more wiring inside to remove and replace during the process.

Therefore, the job of rewiring such a house will definitely require more labour and materials to complete it in the right time. This means that the price of rewiring such a house is higher than when compared to a smaller house.

Materials Needed

When rewiring an entire home in Leicestershire, the following are some of the materials needed for the job:

· Amp service

· New outlets

· Brand new dimmers or switches

· Lighting fixtures

· And Copper wiring

Of course, these might not be all your house needs. Thus, a professional electrician will go over your rewiring needs before determining what materials will be necessary for the wiring.

However, the costs of the materials needed to rewire your home will depend on the size of your house. The bigger its size the more electrical materials you will need for rewiring, which ultimately raises the costs.

Quality Of Electrical Fixtures

Some electrical fixtures are of the highest quality. You can buy them, and they will work towards making you realize the best experience. Take time to research and know the high-quality fixtures you can get. It is advantageous for you to get high-quality fixtures as it will make your house safe and attractive. Apart from the fixtures, you should also check out the brands. Some brands are expensive, but they will last longer.

Having along lasting electrical fixtures makes it possible to get the best results of your house rewiring process.

The Labour Needed

The labour needed is another factor that significantly determines the cost of rewiring a house in Leicestershire. When hiring labour, you’ll have to consider their level of expertise.

It will cost you more if you hire a master licensed electrician as opposed to hiring electrical labour from an apprentice. Similarly, the number of electricians who will be working on your rewiring project will play a part in determining the costs.

Therefore, you need to ascertain the level of electricians you want to work on the rewiring project, and how many will be enough to ascertain the final budget.

The Current Condition of Your Home’s Electrical Fixtures

When rewiring your Leicestershire home, electricians may have to replace more things in your wiring system than you could have expected. For instance, if your home’s light fixtures aren’t compatible with the new wiring, they have to get replaced regardless of their condition.

The same applies to every other electrical fixture present in your home during the rewiring process. Therefore, the more electrical fixtures replaced the more it will cost you to rewire your house.

Accessibility of Wiring

Lastly, it is easier to rewire or wire a house that is still under construction with open walls. That’s because the electricians responsible for the job will have easy access to the wiring system in the house.

Therefore, replacing any electrical fixtures and installing new ones will cost you less. On the other hand, rewiring a house with fitted walls requires the electrician to drill through the wall to find the wiring system. This will definitely cost you more.

How much does it cost to rewire a house in Leicestershire?

Here are some of the approximate costs of different house sizes in Leicestershire:

  • 1 Bedroom: One bedroomed house will cost between £1900-£3000. In one bedroom house, you will have to buy several electrical appliances like a fuse, wire, box etc. The professional will charge the labour fees, among other charges, when carrying out the house rewiring project.
  • 2 Bedroom: Rewiring of two-bedroomed houses can be done in £2300-£3500. You are expected to pay more when you go for a two-bedroom house instead of one bedroom for several reasons. For example, for a two-bedroom house, you will have to pay an additional amount for more fixtures and labour.
  • Similarly, the cost of rewiring a 3 bedroom, 4 bedroom and 5 bedroom house will be £3000-£4500, £3700-£5500, and £5500-£6500 respectively.

Why electrical services from C&M Electrical Contractors?

As you have seen, there are multiple factors that play a part in determining the final rewiring costs of your home. That said, at C&M Electrical Contractors, we provide home rewiring services at the best prices in Leicestershire.

Our goal is to deliver only the best to our clients depending on their preferences and budget allocation. With us, you can rest assured of a good rewiring project in your Leicestershire home.

Related Articles

Rewiring a house in Leicestershire is a comprehensive job that requires certified and trustworthy electricians. With that in mind, most homeowners want to know how much it really costs to rewire their entire home.

While the question is straightforward, the answer is far from that assumption. Rewiring your entire home is a big job that requires a significant and adequate budget to get done professionally.

Moreover, there isn’t a standard amount of how much it really costs to rewire your entire Leicestershire home. That’s because all houses are not the same, which means that the total amount needed to rewire an entire house in Leicestershire varies from house to house.

Factors that Affect the Costs of Rewiring a House in Leicestershire

As explained earlier, there are different factors that will affect the cost of rewiring your house. Such factors include the size of your house, needed upgrades, and the material costs, among other essentials things.

Here, we look at some of the most common factors that determine the final budget of how much it really costs to rewire an entire house in Leicestershire. That’s said, below are the cost factors that impact home rewiring:

The Size of Your Home

This is the first and most significant factor when it comes to the budget needed to rewire your home. The square footage of your home must, in one way or the other impact the total costs of rewiring it. First, a large house will ultimately have more wiring inside to remove and replace during the process.

Therefore, the job of rewiring such a house will definitely require more labour and materials to complete it in the right time. This means that the price of rewiring such a house is higher than when compared to a smaller house.

Materials Needed

When rewiring an entire home in Leicestershire, the following are some of the materials needed for the job:

· Amp service

· New outlets

· Brand new dimmers or switches

· Lighting fixtures

· And Copper wiring

Of course, these might not be all your house needs. Thus, a professional electrician will go over your rewiring needs before determining what materials will be necessary for the wiring.

However, the costs of the materials needed to rewire your home will depend on the size of your house. The bigger its size the more electrical materials you will need for rewiring, which ultimately raises the costs.

Quality Of Electrical Fixtures

Some electrical fixtures are of the highest quality. You can buy them, and they will work towards making you realize the best experience. Take time to research and know the high-quality fixtures you can get. It is advantageous for you to get high-quality fixtures as it will make your house safe and attractive. Apart from the fixtures, you should also check out the brands. Some brands are expensive, but they will last longer.

Having along lasting electrical fixtures makes it possible to get the best results of your house rewiring process.

The Labour Needed

The labour needed is another factor that significantly determines the cost of rewiring a house in Leicestershire. When hiring labour, you’ll have to consider their level of expertise.

It will cost you more if you hire a master licensed electrician as opposed to hiring electrical labour from an apprentice. Similarly, the number of electricians who will be working on your rewiring project will play a part in determining the costs.

Therefore, you need to ascertain the level of electricians you want to work on the rewiring project, and how many will be enough to ascertain the final budget.

The Current Condition of Your Home’s Electrical Fixtures

When rewiring your Leicestershire home, electricians may have to replace more things in your wiring system than you could have expected. For instance, if your home’s light fixtures aren’t compatible with the new wiring, they have to get replaced regardless of their condition.

The same applies to every other electrical fixture present in your home during the rewiring process. Therefore, the more electrical fixtures replaced the more it will cost you to rewire your house.

Accessibility of Wiring

Lastly, it is easier to rewire or wire a house that is still under construction with open walls. That’s because the electricians responsible for the job will have easy access to the wiring system in the house.

Therefore, replacing any electrical fixtures and installing new ones will cost you less. On the other hand, rewiring a house with fitted walls requires the electrician to drill through the wall to find the wiring system. This will definitely cost you more.

How much does it cost to rewire a house in Leicestershire?

Here are some of the approximate costs of different house sizes in Leicestershire:

  • 1 Bedroom: One bedroomed house will cost between £1900-£3000. In one bedroom house, you will have to buy several electrical appliances like a fuse, wire, box etc. The professional will charge the labour fees, among other charges, when carrying out the house rewiring project.
  • 2 Bedroom: Rewiring of two-bedroomed houses can be done in £2300-£3500. You are expected to pay more when you go for a two-bedroom house instead of one bedroom for several reasons. For example, for a two-bedroom house, you will have to pay an additional amount for more fixtures and labour.
  • Similarly, the cost of rewiring a 3 bedroom, 4 bedroom and 5 bedroom house will be £3000-£4500, £3700-£5500, and £5500-£6500 respectively.

Why electrical services from C&M Electrical Contractors?

As you have seen, there are multiple factors that play a part in determining the final rewiring costs of your home. That said, at C&M Electrical Contractors, we provide home rewiring services at the best prices in Leicestershire.

Our goal is to deliver only the best to our clients depending on their preferences and budget allocation. With us, you can rest assured of a good rewiring project in your Leicestershire home.

Related Articles

As a landlord, part of the regular inspections you do in your property should go to electrical installations. We all know that faulty electrical installations pose a major risk of fires, electrical shocks and irreversible injuries to people accessing the property.

The government on learning about the risk some landlords who fail to maintain secure, safe and quality accommodation pose to their tenants have set standards and regulations to curb this. In terms of electrical installations, it is now a legal requirement for landlords in England to ensure that their property’s electrical installation is maintained in the safest condition possible.

If you are a Landlord in the UK, you should be aware that the government has set electrical safety regulations to:

• Ensure that with the help of a certified and registered electrician, you inspect the electrical wiring, plug sockets, fuse boxes or consumer units, the light fittings and other fixed electrical components in your rented property after every 5 years. This does not lock out inspections before this period ends, that your electrician feels are necessary.

• Confirm that national electrical safety standards are met throughout the period that a tenant occupies your property.

• Ensure that an (EICR) is submitted to the relevant body in the national government, local council and tenant if needed.

All these electrical safety regulations apply to all landlords in England and aim to provide a safe living environment for all the people who access the rental property. On doing the inspection, you should take the initiative of fixing any serious or minor defects detected in the electrical installation of your property. All the electrical works done to reduce the hazards must also be included by the certified electrician, in the EICR. If there are no defects, the results of the electrical testing should also be recorded in the EICR.

So what exactly is an EICR?


EICR is the contraction of the Electrical Installation Condition Report, a formal document that is drafted following an assessment of the electrical installation condition in a property. A qualified and registered electrician should do the inspection and the drafting of the EICR.

Although the EICRs were not compulsory for landlords before, it is now a legal requirement in the private rented sector. You now must produce this document on inspection of your electrical installation every 5 years unless your qualified electrician advises you to do it sooner. Since there are penalties for non-compliant landlords, it would be best to complete EICR at least one month before it is required.

Although many landlords may take this seriously now because it is a legal requirement, you should know that EICR brings to you and your tenants’ peace of mind knowing that the property is electrically safe. Again, since many tenants now ask for this formal document before they agree to settle in a property, it goes a long way in determining your rental houses’ level of occupancy and hence your overall rental income.

The goals of the EICR are:


• To record the results of an inspection done by a registered electrician on you rental houses and to make sure that the electrical installations done there are safe to be used by the tenants until the next inspection is carried. This includes any repairs done during the inspection.

• To check for damages in the form of wear and tear in the fixed electrical installations that might affect tenants’ safety or the safety of any other person accessing the property.

• To find any component of the electrical installation that does not meet the IET wiring regulations.

• To identify any part in the electrical installation that may cause high temperatures or electrical shocks.

• To provide a record of the installations done at the time of the inspection and to provide a reference for the inspections that will be done in the future.

What to do if your property fails an EICR inspection?

In a case where there is a breach of safety standard as per the regulations of EICR, the fault should be identified by a certified electrician and it should be further investigated or fixed by a certified electrician within 28 days. Once all the work gets completed, there are certain things that need to be done by the landlord:

  • The landlord must obtain written confirmation from a certified electrician that the work has been carried out as per the electrical safety standards or all the safety requirements have been met and no further work is required.
  • Submit the written confirmation along with the copy of the original report specifying the work required to the local housing authority within 28 of completion of work.
  • Provide each resident of the property with the same written confirmation and the original report also within 28 days of completion of work.

This process must be repeated until all the electrical safety standards are completely satisfied.

The most straightforward way to stay on the safe side in the eyes of the tenants, your local authority and the government as a whole is hiring a certified electrician for all your electrical needs.

In this regard, we believe that at C&M Electrical Contractors, we have all it takes to be the most reliable electrical contractor in England, UK you can pick today. We pride ourselves in providing the best electrical services for homes and offices in and around Leicestershire at very competitive prices in the current market. Our team of qualified and experienced electricians performs the job with perfection to make sure you do not face any problem in the future. Please choose us and experience what premium electrical services in all the stages of design, installation inspection, and preparation of EICR means.

Related Articles

As a landlord, part of the regular inspections you do in your property should go to electrical installations. We all know that faulty electrical installations pose a major risk of fires, electrical shocks and irreversible injuries to people accessing the property.

The government on learning about the risk some landlords who fail to maintain secure, safe and quality accommodation pose to their tenants have set standards and regulations to curb this. In terms of electrical installations, it is now a legal requirement for landlords in England to ensure that their property’s electrical installation is maintained in the safest condition possible.

If you are a Landlord in the UK, you should be aware that the government has set electrical safety regulations to:

• Ensure that with the help of a certified and registered electrician, you inspect the electrical wiring, plug sockets, fuse boxes or consumer units, the light fittings and other fixed electrical components in your rented property after every 5 years. This does not lock out inspections before this period ends, that your electrician feels are necessary.

• Confirm that national electrical safety standards are met throughout the period that a tenant occupies your property.

• Ensure that an (EICR) is submitted to the relevant body in the national government, local council and tenant if needed.

All these electrical safety regulations apply to all landlords in England and aim to provide a safe living environment for all the people who access the rental property. On doing the inspection, you should take the initiative of fixing any serious or minor defects detected in the electrical installation of your property. All the electrical works done to reduce the hazards must also be included by the certified electrician, in the EICR. If there are no defects, the results of the electrical testing should also be recorded in the EICR.

So what exactly is an EICR?


EICR is the contraction of the Electrical Installation Condition Report, a formal document that is drafted following an assessment of the electrical installation condition in a property. A qualified and registered electrician should do the inspection and the drafting of the EICR.

Although the EICRs were not compulsory for landlords before, it is now a legal requirement in the private rented sector. You now must produce this document on inspection of your electrical installation every 5 years unless your qualified electrician advises you to do it sooner. Since there are penalties for non-compliant landlords, it would be best to complete EICR at least one month before it is required.

Although many landlords may take this seriously now because it is a legal requirement, you should know that EICR brings to you and your tenants’ peace of mind knowing that the property is electrically safe. Again, since many tenants now ask for this formal document before they agree to settle in a property, it goes a long way in determining your rental houses’ level of occupancy and hence your overall rental income.

The goals of the EICR are:


• To record the results of an inspection done by a registered electrician on you rental houses and to make sure that the electrical installations done there are safe to be used by the tenants until the next inspection is carried. This includes any repairs done during the inspection.

• To check for damages in the form of wear and tear in the fixed electrical installations that might affect tenants’ safety or the safety of any other person accessing the property.

• To find any component of the electrical installation that does not meet the IET wiring regulations.

• To identify any part in the electrical installation that may cause high temperatures or electrical shocks.

• To provide a record of the installations done at the time of the inspection and to provide a reference for the inspections that will be done in the future.

What to do if your property fails an EICR inspection?

In a case where there is a breach of safety standard as per the regulations of EICR, the fault should be identified by a certified electrician and it should be further investigated or fixed by a certified electrician within 28 days. Once all the work gets completed, there are certain things that need to be done by the landlord:

  • The landlord must obtain written confirmation from a certified electrician that the work has been carried out as per the electrical safety standards or all the safety requirements have been met and no further work is required.
  • Submit the written confirmation along with the copy of the original report specifying the work required to the local housing authority within 28 of completion of work.
  • Provide each resident of the property with the same written confirmation and the original report also within 28 days of completion of work.

This process must be repeated until all the electrical safety standards are completely satisfied.

The most straightforward way to stay on the safe side in the eyes of the tenants, your local authority and the government as a whole is hiring a certified electrician for all your electrical needs.

In this regard, we believe that at C&M Electrical Contractors, we have all it takes to be the most reliable electrical contractor in England, UK you can pick today. We pride ourselves in providing the best electrical services for homes and offices in and around Leicestershire at very competitive prices in the current market. Our team of qualified and experienced electricians performs the job with perfection to make sure you do not face any problem in the future. Please choose us and experience what premium electrical services in all the stages of design, installation inspection, and preparation of EICR means.

Related Articles

There comes a time in your life that you will think of owning property. There are a few tips and tricks that you will need to have in mind when buying property. Below are some of the tips that you need to take into consideration, in terms of electricity, when buying property.

Do not buy a property without an electrical certificate. 

You should know that this is the number one golden rule in buying property. You should never buy a property that does not have an electrical report or certificate. Surveys have shown that moving houses comes with a lot of work and stress. And with all that, you will find that some things are overlooked or may get ignored or missed. However, you must not forget to ask for an electrical certificate when buying the property. As a home buyer, you need an Electrical Installation Condition Report (EICR). This is an 8-page report that highlights the condition of the installation. It also has to have a quotation to bring the installation up to regulation BS7671.

Ensure that the plugs and cables are in good condition.

When buying property, it is important to check ALL the plugs and cables. Make sure that they are not damaged. This could be a sign of loose electrical wiring or other electrical problems. If you think that something needs changing, then fix it immediately. Do not wait because electrical accidents are very dangerous and fatal. You should also note that you need a professional electrician to check that. 

Be on the lookout for any coloured wires sticking out, this can lead to an electrical shock when touched with bare hands.

Make sure that no coloured wire is between the plugs and the power leads. Also, do not overload sockets as this could lead to overheating.

Check that the light fixtures are not visibly damaged and are in good working condition.

Many people expose themselves and their loved ones to the dangers of fatal electrical accidents because of small mistakes like a lack of knowledge about the dangers of electricity. It is very important to ensure that the electrical installation in your property is well maintained and looked at by a registered electrician, they should be able to check if the installation is safe.

There are, however, some checks that you can make on your own. They include: 

▪ Ensure that you have RCD protection in the fuse box

▪ Ensure no plugs and sockets are damaged

▪ Do not store flammable materials around the fuse box or any electrical intake.

▪ Check if the visible cables and leads are in good condition

▪ Never put cables under rugs or carpets

▪ Do not use the top of the microwave as storage

▪ Don’t overload sockets

▪ Ensure to switch off electrical items when not in use.

Ensure that the key electrical regulations are followed

These regulations include: sockets should be a minimum of 450mm from the floor. The light witches must also be a maximum of1.2m above the floor. These height regulations are supposed to reduce back strain for the physically challenged. However, these regulations don’t apply to kitchens and garages for obvious reasons. Other regulations stipulate that you should run cables vertically or horizontally across walls. Do not run the cables diagonally.

The fuse board should be kept in a metal enclosure

An investigation by the London Fire Brigade has revealed that household fires are mainly caused by plastic consumer-units. The accidents have occurred so because of substandard cable connections by incompetent electricians in the consumer unit. Therefore, all consumer units must be kept in a non-combustible enclosure material.

Understand the circuits

A circuit is a path where electric current flow. You will have separate circuits for the lighting downstairs, upstairs, and sockets for both upstairs and downstairs. This is beneficial because for example, the upstairs lighting trips due to a fault, the downstairs lighting will not be affected. Therefore, you won’t be in total darkness. 

Dampness

Check for dampness on the property. Some property is built over a swamp or very mushy areas. This will affect the electrical supply when the dampness starts seeping through your walls. Most electric cables are installed on walls and when that water starts seeping in, then that will cause a very big problem for you. Do not buy a property built in swampy areas. Not only is it unsafe when electricity is involved but also it will cause molds to grow and which is hazardous to your health.

Light appliances and components

All ceiling-mounted or wall-mounted light fixtures must be secured well into place. If they are hanging loose, this can be dangerous to you and your family. All bulbs should be checked for correct wattage. If this is ignored then there is a chance of overheating and burning of objects nearby like a newspaper or a bedsheet.

Electrical outlets should be in good working condition

A licensed electrician should look at this and certify that the electric outlets within the property are working properly. The outlets must not have any physical defects. They must have proper tension and must be grounded.

Test smoke alarms and do a safety switch testing

Activate the smoke alarm to ascertain if it’s working or not. If not, you need to call in your electrical to look at it and fix it. Smoke alarms are so important in case of fire outbreaks. They will detect the smoke and immediately go off. For example, a fire may occur due to an electrical fault. The smoke detector will help to alarm you to get to safety before it’s too late.

These steps may seem too much, but they are all essential especially for your safety and that of your family. So, before buying property, ensure that all electrical problems are addressed and sorted, that way, you will be safe.

In conclusion, making sure that the electrical concerns are tended to before buying a house is an important step like any other steps you would take to own that property that you like.C & M electrical contractors makes sure that these electrical concerns are taken care of. It was set up in Leicester in 2005 and only small domestic electrical jobs were done then but it turned into a NICEIC approved contractor firm and that too in less than 2 years of time. Electrical work for homeowners/ businesses/ schools and colleges/ property management companies is carried out by us across the midlands. You will be provided all the support you need so don’t forget to contact us here.

Related Articles

There comes a time in your life that you will think of owning property. There are a few tips and tricks that you will need to have in mind when buying property. Below are some of the tips that you need to take into consideration, in terms of electricity, when buying property.

Do not buy a property without an electrical certificate. 

You should know that this is the number one golden rule in buying property. You should never buy a property that does not have an electrical report or certificate. Surveys have shown that moving houses comes with a lot of work and stress. And with all that, you will find that some things are overlooked or may get ignored or missed. However, you must not forget to ask for an electrical certificate when buying the property. As a home buyer, you need an Electrical Installation Condition Report (EICR). This is an 8-page report that highlights the condition of the installation. It also has to have a quotation to bring the installation up to regulation BS7671.

Ensure that the plugs and cables are in good condition.

When buying property, it is important to check ALL the plugs and cables. Make sure that they are not damaged. This could be a sign of loose electrical wiring or other electrical problems. If you think that something needs changing, then fix it immediately. Do not wait because electrical accidents are very dangerous and fatal. You should also note that you need a professional electrician to check that. 

Be on the lookout for any coloured wires sticking out, this can lead to an electrical shock when touched with bare hands.

Make sure that no coloured wire is between the plugs and the power leads. Also, do not overload sockets as this could lead to overheating.

Check that the light fixtures are not visibly damaged and are in good working condition.

Many people expose themselves and their loved ones to the dangers of fatal electrical accidents because of small mistakes like a lack of knowledge about the dangers of electricity. It is very important to ensure that the electrical installation in your property is well maintained and looked at by a registered electrician, they should be able to check if the installation is safe.

There are, however, some checks that you can make on your own. They include: 

▪ Ensure that you have RCD protection in the fuse box

▪ Ensure no plugs and sockets are damaged

▪ Do not store flammable materials around the fuse box or any electrical intake.

▪ Check if the visible cables and leads are in good condition

▪ Never put cables under rugs or carpets

▪ Do not use the top of the microwave as storage

▪ Don’t overload sockets

▪ Ensure to switch off electrical items when not in use.

Ensure that the key electrical regulations are followed

These regulations include: sockets should be a minimum of 450mm from the floor. The light witches must also be a maximum of1.2m above the floor. These height regulations are supposed to reduce back strain for the physically challenged. However, these regulations don’t apply to kitchens and garages for obvious reasons. Other regulations stipulate that you should run cables vertically or horizontally across walls. Do not run the cables diagonally.

The fuse board should be kept in a metal enclosure

An investigation by the London Fire Brigade has revealed that household fires are mainly caused by plastic consumer-units. The accidents have occurred so because of substandard cable connections by incompetent electricians in the consumer unit. Therefore, all consumer units must be kept in a non-combustible enclosure material.

Understand the circuits

A circuit is a path where electric current flow. You will have separate circuits for the lighting downstairs, upstairs, and sockets for both upstairs and downstairs. This is beneficial because for example, the upstairs lighting trips due to a fault, the downstairs lighting will not be affected. Therefore, you won’t be in total darkness. 

Dampness

Check for dampness on the property. Some property is built over a swamp or very mushy areas. This will affect the electrical supply when the dampness starts seeping through your walls. Most electric cables are installed on walls and when that water starts seeping in, then that will cause a very big problem for you. Do not buy a property built in swampy areas. Not only is it unsafe when electricity is involved but also it will cause molds to grow and which is hazardous to your health.

Light appliances and components

All ceiling-mounted or wall-mounted light fixtures must be secured well into place. If they are hanging loose, this can be dangerous to you and your family. All bulbs should be checked for correct wattage. If this is ignored then there is a chance of overheating and burning of objects nearby like a newspaper or a bedsheet.

Electrical outlets should be in good working condition

A licensed electrician should look at this and certify that the electric outlets within the property are working properly. The outlets must not have any physical defects. They must have proper tension and must be grounded.

Test smoke alarms and do a safety switch testing

Activate the smoke alarm to ascertain if it’s working or not. If not, you need to call in your electrical to look at it and fix it. Smoke alarms are so important in case of fire outbreaks. They will detect the smoke and immediately go off. For example, a fire may occur due to an electrical fault. The smoke detector will help to alarm you to get to safety before it’s too late.

These steps may seem too much, but they are all essential especially for your safety and that of your family. So, before buying property, ensure that all electrical problems are addressed and sorted, that way, you will be safe.

In conclusion, making sure that the electrical concerns are tended to before buying a house is an important step like any other steps you would take to own that property that you like.C & M electrical contractors makes sure that these electrical concerns are taken care of. It was set up in Leicester in 2005 and only small domestic electrical jobs were done then but it turned into a NICEIC approved contractor firm and that too in less than 2 years of time. Electrical work for homeowners/ businesses/ schools and colleges/ property management companies is carried out by us across the midlands. You will be provided all the support you need so don’t forget to contact us here.

Related Articles

Commercial electrical works refer to electric projects carried out in commercial buildings and industrial settings. Commercial electrical projects tend to be complex, and as such, require proper installation to prevent electrical hazards and observe safety regulations.

Due to their nature, these types of work require great expertise. You will need experienced commercial electrical contractors to carry out these tasks. Someone who understands the job well and will ensure the electrical system is well organised to smoothly power a commercial building.

Examples of Commercial Electrical Works

A commercial electrician can be done in various commercial settings including offices, retail premises, warehouse facilities, and clubs, just to name a few.

Typically, commercial electrical services will cover:

  • Lighting Installation
  • Electronic system periodic testing and inspection
  • Fire detection system installation
  • Emergency lighting systems
  • Energy-efficient system
  • Appliance installations
  • Electronic renovations
  • Electronic hot water systems

Maintenance of commercial electrical Systems

When it comes to the set-up of commercial and residential electrical systems they are not much different in the way they are operated; each of them requires expertise and skills to run effectively. 

Commercial electrical systems are more complex since the components needed to run a large building are numerous and require the services of skilled personnel only. These tasks include the rewiring and installing of the commercial systems as well as maintenance to ensure it’s safe for all users. All these are complex systems that require the services of qualified and experienced professional electricians so that they can handle them correctly. 

Owners of commercial properties should understand more about the components of commercial electrical systems to enable them to choose an electrician who will align with their interests.

Repairing commercial electrical works

At times your electrical system may look fine on the outside but in reality, it has an underlying problem. The majority of electric failures are caused by improper maintenance. For instance, a commercial system may be exposed to harsh weather, wear, and tearing which, over time, will lead to overloading and subsequent damage to this equipment. But with good maintenance, the equipment will remain in a good condition for a long time while also giving you the essential services you need.

On the other hand, some components of your commercial system may break at times. This occurs mostly due to poor maintenance leading to unchecked or missed problems that can lead to system failure. These failures can cause massive disruptions in the workplace and pose potential dangers to the employees and other individuals. Therefore, you hire only qualified electricians to take charge of your issue while reducing the risk to human life and property. 

Some of the signs that show a flaw in your commercial system are:

  1. Electrical surges 
  2. The light bulbs burning out quickly
  3. Power dips and sags  

What is an industrial electrician?

 An industry electrician can work in many environments, and they help to install, repair, and maintain electronic equipment. Based on the nature of their employer, they can be stationed at a job site, plants, or with direct clients. Since their job is physically demanding, they must be well trained and versed in operating various tools even when close to electrical components. 

They must also understand various documents such as blueprints, instructions, and schematics and make decisions based on them. Industrial electricians are hired by commercial electrical contractors and various maintenance departments of shipyards, mines, and other industries establishments. 

Commercial electrician vs Domestic electrician

 As their name implies, domestic electricians work in homes while commercial electricians work in offices and throughout the industrial sectors installing lighting and power outlets. While domestic electricians follow a one-phase approach during installation, commercial electricians have to adhere to a three-phase approach with two smaller legs of lower voltages and a larger leg of higher voltage. 

Commercial vs. Domestic electrical works

There are many differences between commercial and electric works based on the equipment setup, load demands, and energy needs. These processes have different procedures, technicians, and materials to complete them. Or simply, a commercial electrician cannot handle the work of a residential electrician, and vice versa is also true. Other differences fall in:

  • Power

Residential and commercial properties have varying electrical loads. A residential home only needs one 120V power phase consisting of three wires: positive, neutral, and negative. Some homes have heavy appliances such as refrigerators and dryers require higher energy, and their electricity is supplied in a two-phase circuit that delivers 240V

On the other hand, commercial power supply involves a three-phase system which provides them with the much needed higher energy. This design incorporates a larger leg with 240V and two smaller legs with 120V. this entire phase ensures maximum efficiency of the heavy machines while also ensuring the smaller appliances do not get power overloads.

  • Wiring

Also, there is a difference in the type of wiring used in residential and commercial properties. residential properties use plastic-sheathed wires that protect them from damage. The priority on them is safety but they are also thinner as they have to fit into smaller spaces. On the other hand, commercial buildings require thicker and high-grade wires since they are conducting a large amount of power. Heavy-duty, tube-like conduits are therefore used that enhances safety, ease of access, and wiring protection. Also, commercial wires are more insulated than residential wires to offer them premium protection from corrosive liquids and gases.

  • Installation and accessibility’

  Technicians usually conduct wiring in a residential home before the drywall to prevent the exposure of the wires and pipes behind the property’s walls. These residential technicians also do this since maintenances are rare in this setting and therefore, they ensure they install everything correctly. Additionally, homeowners do not want the wires to be visible after the installation as it presents a danger to their kids and pets. They should therefore pick a qualified and professional technician so that they won’t have to revert to the drywall to do some repairs. 

On the other hand, technicians in commercial homes know that the wires will be under a lot of pressure once they are installed, which can make them wear out faster. That is why they ensure that the wiring will be easily accessible to facilitate updates or repairs when needed. Therefore, they use ducting or conduits during their installations.

At C&M Electricals, we have a team of certified and licensed technicians and professionals to carry out all sorts of commercial electrical works with ease and in a short span of time. Our team of technicians has a quick response time and is always available for your service. Get in touch if you are looking for an experienced electrician for your commercial electrical works.

Related Articles

Commercial electrical works refer to electric projects carried out in commercial buildings and industrial settings. Commercial electrical projects tend to be complex, and as such, require proper installation to prevent electrical hazards and observe safety regulations.

Due to their nature, these types of work require great expertise. You will need experienced commercial electrical contractors to carry out these tasks. Someone who understands the job well and will ensure the electrical system is well organised to smoothly power a commercial building.

Examples of Commercial Electrical Works

A commercial electrician can be done in various commercial settings including offices, retail premises, warehouse facilities, and clubs, just to name a few.

Typically, commercial electrical services will cover:

  • Lighting Installation
  • Electronic system periodic testing and inspection
  • Fire detection system installation
  • Emergency lighting systems
  • Energy-efficient system
  • Appliance installations
  • Electronic renovations
  • Electronic hot water systems

Maintenance of commercial electrical Systems

When it comes to the set-up of commercial and residential electrical systems they are not much different in the way they are operated; each of them requires expertise and skills to run effectively. 

Commercial electrical systems are more complex since the components needed to run a large building are numerous and require the services of skilled personnel only. These tasks include the rewiring and installing of the commercial systems as well as maintenance to ensure it’s safe for all users. All these are complex systems that require the services of qualified and experienced professional electricians so that they can handle them correctly. 

Owners of commercial properties should understand more about the components of commercial electrical systems to enable them to choose an electrician who will align with their interests.

Repairing commercial electrical works

At times your electrical system may look fine on the outside but in reality, it has an underlying problem. The majority of electric failures are caused by improper maintenance. For instance, a commercial system may be exposed to harsh weather, wear, and tearing which, over time, will lead to overloading and subsequent damage to this equipment. But with good maintenance, the equipment will remain in a good condition for a long time while also giving you the essential services you need.

On the other hand, some components of your commercial system may break at times. This occurs mostly due to poor maintenance leading to unchecked or missed problems that can lead to system failure. These failures can cause massive disruptions in the workplace and pose potential dangers to the employees and other individuals. Therefore, you hire only qualified electricians to take charge of your issue while reducing the risk to human life and property. 

Some of the signs that show a flaw in your commercial system are:

  1. Electrical surges 
  2. The light bulbs burning out quickly
  3. Power dips and sags  

What is an industrial electrician?

 An industry electrician can work in many environments, and they help to install, repair, and maintain electronic equipment. Based on the nature of their employer, they can be stationed at a job site, plants, or with direct clients. Since their job is physically demanding, they must be well trained and versed in operating various tools even when close to electrical components. 

They must also understand various documents such as blueprints, instructions, and schematics and make decisions based on them. Industrial electricians are hired by commercial electrical contractors and various maintenance departments of shipyards, mines, and other industries establishments. 

Commercial electrician vs Domestic electrician

 As their name implies, domestic electricians work in homes while commercial electricians work in offices and throughout the industrial sectors installing lighting and power outlets. While domestic electricians follow a one-phase approach during installation, commercial electricians have to adhere to a three-phase approach with two smaller legs of lower voltages and a larger leg of higher voltage. 

Commercial vs. Domestic electrical works

There are many differences between commercial and electric works based on the equipment setup, load demands, and energy needs. These processes have different procedures, technicians, and materials to complete them. Or simply, a commercial electrician cannot handle the work of a residential electrician, and vice versa is also true. Other differences fall in:

  • Power

Residential and commercial properties have varying electrical loads. A residential home only needs one 120V power phase consisting of three wires: positive, neutral, and negative. Some homes have heavy appliances such as refrigerators and dryers require higher energy, and their electricity is supplied in a two-phase circuit that delivers 240V

On the other hand, commercial power supply involves a three-phase system which provides them with the much needed higher energy. This design incorporates a larger leg with 240V and two smaller legs with 120V. this entire phase ensures maximum efficiency of the heavy machines while also ensuring the smaller appliances do not get power overloads.

  • Wiring

Also, there is a difference in the type of wiring used in residential and commercial properties. residential properties use plastic-sheathed wires that protect them from damage. The priority on them is safety but they are also thinner as they have to fit into smaller spaces. On the other hand, commercial buildings require thicker and high-grade wires since they are conducting a large amount of power. Heavy-duty, tube-like conduits are therefore used that enhances safety, ease of access, and wiring protection. Also, commercial wires are more insulated than residential wires to offer them premium protection from corrosive liquids and gases.

  • Installation and accessibility’

  Technicians usually conduct wiring in a residential home before the drywall to prevent the exposure of the wires and pipes behind the property’s walls. These residential technicians also do this since maintenances are rare in this setting and therefore, they ensure they install everything correctly. Additionally, homeowners do not want the wires to be visible after the installation as it presents a danger to their kids and pets. They should therefore pick a qualified and professional technician so that they won’t have to revert to the drywall to do some repairs. 

On the other hand, technicians in commercial homes know that the wires will be under a lot of pressure once they are installed, which can make them wear out faster. That is why they ensure that the wiring will be easily accessible to facilitate updates or repairs when needed. Therefore, they use ducting or conduits during their installations.

At C&M Electricals, we have a team of certified and licensed technicians and professionals to carry out all sorts of commercial electrical works with ease and in a short span of time. Our team of technicians has a quick response time and is always available for your service. Get in touch if you are looking for an experienced electrician for your commercial electrical works.

Related Articles

The Electrical Installation Report (EICR) is a document which shows the state and present condition of any electrical installation within a particular location. The report is also commonly known as a periodic inspection, landlord electrical certificate, or home condition reports. The process of carrying out a periodic inspection is highly essential because installations, appliances and electrical devices naturally wear out and deteriorate. To prevent unexpected fires and accidents, you should carry out periodic inspections at regular intervals.

The report can only be issued after a full periodic inspection and testing process has been carried out. The process has to do with tests such as electrical tests and virtual inspections of the installation. In simpler terms, EICR is a report which shows that an electrical installation has been perfectly carried out.

The findings from the testing are usually presented in a neatly organised manner. The report is averagely 8-9 pages long and at the end of the document, there’s a declaration which summarises the state of the electrical installation as either satisfactory or unsatisfactory.

How Often Should EICR be Carried Out?

Depending on what the installation is, how often it is being used, and the surrounding environment, the frequency of a periodic electrical testing varies from 1-5 years.

Most commercial businesses carry out the periodic testing every five years. However, a deterioration in the condition of the installation would mean that they need to conduct the testing at shorter intervals. This means that if you were operating at a 5-year interval, but noticed a deterioration in the installation, then you need to carry out an EICR more often.

Most workplace environments require a new Electrical Installation Condition Report to be showed every 5 years. This doesn’t mean they won’t carry out annual routine inspections. Routine inspections are necessary, and are not to be substituted for periodic inspections.

In restaurants, hotels, educational institutions, places of worship, offices, retail outlets, homes, and apartments, a 5-yearly fixed EICR is required. However, in places which typically have a high level of exposure to dust, heat or moisture, they are required to carry out their periodic testing every one to three years. This is because they are more prone to dust and other factors which are likely to affect them.

Who Should Sort Out an EICR?

Typically, it is the landlord’s duty to ensure that an EICR is carried out. The landlord can either choose to carry out the periodic testing every 5 years or at the start of each tenancy. The landlord must also have evidence to show that a registered electrician carried out the testing. There have been cases of electricians stating that an installation was satisfactory, only for the same Installation to result into electrocutions and fires. This is why for an electrician to prove his competency, he has to have at least a level 3 periodic qualification. This proves that he is experienced and qualified, reducing the risk of such installations and ensuring safety.

How Much Does an EICR Cost?

This also depends on where the location is, how old the property is, and how much testing is required. The cost of carrying out a periodic testing basically varies from one place to the other. For one-bedroom flats, EICR costs £120 while a five-bedroom house costs £300 to carry out a standard periodic testing.

In Leicester, if one wished to insure a property, insurers usually require an EICR report before they can proceed with the insurance. For a 2-bedroom flat in Leicester, EICR reports usually cost between 100-250 pounds.

Before one can get an EICR in Leicester, one needs a team of experts to carry out a complete testing. These experts are the ones who will ascertain that the property is safe and is not dangerous. They are the ones who test every appliance and Installation, seeking for anything out of place and monitoring the slightest reaction of these installations to normal situations. Their experience allows them to know what to look out for while conducting an EICR. It also helps them pay closer attention to the installations than other electricians without adequate experience might do.

What Will the Testing Involve?

The periodic testing involves fixed appliances and wiring, such as plug sockets, fuse box, and light fittings. Equipment and permanent fixtures such as extractors and showers will also be inspected.

The electrician will ascertain if there are any overloaded installations. He will also find out if there are any fire hazards or likely risks from the electrical installations. Electrical appliances such as televisions, cookers, are not covered by the periodic testing.

The Final EICR Report

Landlords are usually required to obtain a report from the electrician in charge of the inspection. The test explains final outcomes and shows if more work such as remedial work is required. The report is to be submitted to the tenant within 28 days of the test.

Inspectors carrying out the test have certain codes they use to classify whether an installation is safe or if it requires urgent attention. Code 1 means “Danger Present.” While Code 2 means the Installation has potential risks.

Areas Where We Provide EICR Service

C & M Electricals provides Electrical Installation Condition Reports in areas across Leicestershire. Some of the areas are Clarendon Park, Knighton, Stoneygate, Aylestone, Westcotes, Winston, and Leicester City Centre.

The document will show that all installations are truly working as they should, helping you to prevent accidents and fire hazards. Your home should be the safest place for you, and what better way to make it safe than to carry out a periodic testing? This way, you can rest assured knowing that everything’s working correctly and you’re not in danger.

Related Articles

The Electrical Installation Report (EICR) is a document which shows the state and present condition of any electrical installation within a particular location. The report is also commonly known as a periodic inspection, landlord electrical certificate, or home condition reports. The process of carrying out a periodic inspection is highly essential because installations, appliances and electrical devices naturally wear out and deteriorate. To prevent unexpected fires and accidents, you should carry out periodic inspections at regular intervals.

The report can only be issued after a full periodic inspection and testing process has been carried out. The process has to do with tests such as electrical tests and virtual inspections of the installation. In simpler terms, EICR is a report which shows that an electrical installation has been perfectly carried out.

The findings from the testing are usually presented in a neatly organised manner. The report is averagely 8-9 pages long and at the end of the document, there’s a declaration which summarises the state of the electrical installation as either satisfactory or unsatisfactory.

How Often Should EICR be Carried Out?

Depending on what the installation is, how often it is being used, and the surrounding environment, the frequency of a periodic electrical testing varies from 1-5 years.

Most commercial businesses carry out the periodic testing every five years. However, a deterioration in the condition of the installation would mean that they need to conduct the testing at shorter intervals. This means that if you were operating at a 5-year interval, but noticed a deterioration in the installation, then you need to carry out an EICR more often.

Most workplace environments require a new Electrical Installation Condition Report to be showed every 5 years. This doesn’t mean they won’t carry out annual routine inspections. Routine inspections are necessary, and are not to be substituted for periodic inspections.

In restaurants, hotels, educational institutions, places of worship, offices, retail outlets, homes, and apartments, a 5-yearly fixed EICR is required. However, in places which typically have a high level of exposure to dust, heat or moisture, they are required to carry out their periodic testing every one to three years. This is because they are more prone to dust and other factors which are likely to affect them.

Who Should Sort Out an EICR?

Typically, it is the landlord’s duty to ensure that an EICR is carried out. The landlord can either choose to carry out the periodic testing every 5 years or at the start of each tenancy. The landlord must also have evidence to show that a registered electrician carried out the testing. There have been cases of electricians stating that an installation was satisfactory, only for the same Installation to result into electrocutions and fires. This is why for an electrician to prove his competency, he has to have at least a level 3 periodic qualification. This proves that he is experienced and qualified, reducing the risk of such installations and ensuring safety.

How Much Does an EICR Cost?

This also depends on where the location is, how old the property is, and how much testing is required. The cost of carrying out a periodic testing basically varies from one place to the other. For one-bedroom flats, EICR costs £120 while a five-bedroom house costs £300 to carry out a standard periodic testing.

In Leicester, if one wished to insure a property, insurers usually require an EICR report before they can proceed with the insurance. For a 2-bedroom flat in Leicester, EICR reports usually cost between 100-250 pounds.

Before one can get an EICR in Leicester, one needs a team of experts to carry out a complete testing. These experts are the ones who will ascertain that the property is safe and is not dangerous. They are the ones who test every appliance and Installation, seeking for anything out of place and monitoring the slightest reaction of these installations to normal situations. Their experience allows them to know what to look out for while conducting an EICR. It also helps them pay closer attention to the installations than other electricians without adequate experience might do.

What Will the Testing Involve?

The periodic testing involves fixed appliances and wiring, such as plug sockets, fuse box, and light fittings. Equipment and permanent fixtures such as extractors and showers will also be inspected.

The electrician will ascertain if there are any overloaded installations. He will also find out if there are any fire hazards or likely risks from the electrical installations. Electrical appliances such as televisions, cookers, are not covered by the periodic testing.

The Final EICR Report

Landlords are usually required to obtain a report from the electrician in charge of the inspection. The test explains final outcomes and shows if more work such as remedial work is required. The report is to be submitted to the tenant within 28 days of the test.

Inspectors carrying out the test have certain codes they use to classify whether an installation is safe or if it requires urgent attention. Code 1 means “Danger Present.” While Code 2 means the Installation has potential risks.

Areas Where We Provide EICR Service

C & M Electricals provides Electrical Installation Condition Reports in areas across Leicestershire. Some of the areas are Clarendon Park, Knighton, Stoneygate, Aylestone, Westcotes, Winston, and Leicester City Centre.

The document will show that all installations are truly working as they should, helping you to prevent accidents and fire hazards. Your home should be the safest place for you, and what better way to make it safe than to carry out a periodic testing? This way, you can rest assured knowing that everything’s working correctly and you’re not in danger.

Related Articles

With the recent technological developments and advancement, our world is speedily advancing towards a completely digitalised era with technology and innovations in every sphere. From work to recreation, relaxation, and even at home, technology is becoming an undeniable force to be reckoned with. At first, we heard of smartphones, and now it’s smart homes. In the end, it comes down to an attempt to make life as simple and easy as possible.

Research has shown that it is highly possible that by 2040, smart homes would have been universally accepted. Just like only 9% of households had access to the internet in 1998, and the numbers exponentially increased to 90% by 2017, so also the number of homes adopting smart home devices would have multiplied by 2040.

What is a Smart Home?

A smart home is a home with devices, commonly known as smart home devices, which can be controlled remotely by linking to a smartphone or any other device with internet access. It refers to homes with devices connected to the internet which enable them to be remotely monitored and managed. Smart home technology gives its users convenience, security, energy efficiency, and comfort. This is a major part of the internet of things (IoT) as it allows every smart home device to work together cooperating and sharing data from the consumer’s usage.

This could seem to be something you’ve only seen or read about in science fiction, but there are real households who have successfully incorporated smart home devices into their daily lives. According to a survey, almost a quarter of every London home presently uses at least one smart home device. The most popular ones are smart speakers that feature voice recognition, security systems, and thermostats.

A smart home is a component of the internet of things (IoT). The smart devices connected within the system work together to pool consumer usage data, learn the homeowner’s preferences, and use the knowledge to automate actions.

What is a Smart Home Device?

A smart home device is any home device that can be connected to the internet to speed up its performance and spur it to act on its own to a reasonable extent. A smart home device is an innovative concept designed to make living easier, and relatively highly convenient. It possesses the ability to work together, cooperating to give consumers a maximum user experience. Smart home devices include smart bulbs, smart speakers, cameras, sensors, etc. These devices can all be connected to a hub which is what helps them communicate with each other and also with the consumer.

How to Make a Smart Home?

You can either set up your smart home through wireless or hardwired systems. This means that you could either have wires connected to your smart home devices to make them function properly, or you could have them set up through wireless systems. To begin with, you would need to check with your internet service provider if you have a fast enough internet connection as well as confirm if your Wi-Fi area is wide enough.

Secondly, you would need a smart home hub to connect your smart devices. For this, you could go with either the Apple HomeKit, Google Assistant, or Amazon Alexa, depending on your preferences. Once this is installed, safety would be among your next concerns. This would require you to install lights, wireless security cameras, and an effective thermostat to control room temperature.

Here are the top 5 facts about Smart Homes:

1. How to Set Up a Smart Home on a Budget?

Naturally, after reading all the above fantastic features of smart homes and smart home devices, it goes without saying that while you might be considering giving the technology a trial, you might be bothered or hesitant due to the costs that come with such an evolutionary change. However, you can set up a smart home, even if you’re on a small budget. You don’t need millions of pounds before you can control your household devices and appliances by using voice commands. Neither do you need billions to add a surveillance system to your house. With nearly £120, you can do these and even more. There is a group of products that can help you conveniently build a smart home without having to go broke or bankrupt. These include the Echo Dot, (3rd Generation) which is a smart speaker with Alexa, and costs approximately £39.99.

Philips Hue is the smart light bulb and is among the top most products for a Smart Home starting at just £14.99. It can be connected through a hub. It can also be used when the internet goes down.

2. What Does a Smart Home Do?

A smart home has a central system installed either on a mobile or some other device connected to the internet, which the user can use to create time schedules for certain changes to be effected. It also comes with skills that enable it to easily learn their homeowner’s schedules and also make the needed adjustments. A smart home is enabled with control for lighting and electricity to either reduce or increase electricity use. Some smart homes also alert the owners whenever there is any movement in the house, while the owners are away. There are even smarter homes that can call the police or fire department in case of emergencies.

3. How Much Bandwidth Does a Smart Home Use?

A good, strong, and stable reliable internet connection is probably the most important thing you need to successfully integrate your smart home devices and make your home a smart home. Most of the smart home devices do not necessarily require high bandwidth, and so they allow you to easily get away with your present internet speed. This implies that for some smart home devices, your present internet speed can cater to your devices’ connectivity requirement.

4. How to Protect a Smart Home?

As with every great invention, smart homes have a few downsides and the most important one is the security risk it poses. It could leave your entire home vulnerable to cybercriminals and hackers. This Is why you need to take extra precautions to protect your smart home. To start with, move your Wi-Fi router to a more secure router. Then, research the smart devices you want to get to ascertain that they won’t put your entire home at a huge risk.

5. What Does the Smart Home Hub Do?

The Smart Home Hub is the central gadget that is in charge of all your smart home devices. It is like the communication center for the internet of things (IoT) which connects all the devices within the home and enables them to communicate with one another and also easily communicate with you.

Smart Homes, while they may not be the present, yet they are undeniably the future. With the ease, convenience, and efficiency that smart homes promise, there’s every reason for almost every home to be upgraded into a smart home.


C&M Electrical Services have experience of over 25 years. Our team has extremely skilled professionals. Every work done is by a highly skilled team of NICEIC approved electricians who would reach you on time so as to deliver timely work. To provide peace of mind to the customers, passing a DBS check is a must for our electrical engineers. Electrical contracting services are provided to you in different sectors like commercial, industrial, and domestic. No matter where you require our services: at your home or at your business, we’ve got you covered.

Related Articles

With the recent technological developments and advancement, our world is speedily advancing towards a completely digitalised era with technology and innovations in every sphere. From work to recreation, relaxation, and even at home, technology is becoming an undeniable force to be reckoned with. At first, we heard of smartphones, and now it’s smart homes. In the end, it comes down to an attempt to make life as simple and easy as possible.

Research has shown that it is highly possible that by 2040, smart homes would have been universally accepted. Just like only 9% of households had access to the internet in 1998, and the numbers exponentially increased to 90% by 2017, so also the number of homes adopting smart home devices would have multiplied by 2040.

What is a Smart Home?

A smart home is a home with devices, commonly known as smart home devices, which can be controlled remotely by linking to a smartphone or any other device with internet access. It refers to homes with devices connected to the internet which enable them to be remotely monitored and managed. Smart home technology gives its users convenience, security, energy efficiency, and comfort. This is a major part of the internet of things (IoT) as it allows every smart home device to work together cooperating and sharing data from the consumer’s usage.

This could seem to be something you’ve only seen or read about in science fiction, but there are real households who have successfully incorporated smart home devices into their daily lives. According to a survey, almost a quarter of every London home presently uses at least one smart home device. The most popular ones are smart speakers that feature voice recognition, security systems, and thermostats.

A smart home is a component of the internet of things (IoT). The smart devices connected within the system work together to pool consumer usage data, learn the homeowner’s preferences, and use the knowledge to automate actions.

What is a Smart Home Device?

A smart home device is any home device that can be connected to the internet to speed up its performance and spur it to act on its own to a reasonable extent. A smart home device is an innovative concept designed to make living easier, and relatively highly convenient. It possesses the ability to work together, cooperating to give consumers a maximum user experience. Smart home devices include smart bulbs, smart speakers, cameras, sensors, etc. These devices can all be connected to a hub which is what helps them communicate with each other and also with the consumer.

How to Make a Smart Home?

You can either set up your smart home through wireless or hardwired systems. This means that you could either have wires connected to your smart home devices to make them function properly, or you could have them set up through wireless systems. To begin with, you would need to check with your internet service provider if you have a fast enough internet connection as well as confirm if your Wi-Fi area is wide enough.

Secondly, you would need a smart home hub to connect your smart devices. For this, you could go with either the Apple HomeKit, Google Assistant, or Amazon Alexa, depending on your preferences. Once this is installed, safety would be among your next concerns. This would require you to install lights, wireless security cameras, and an effective thermostat to control room temperature.

Here are the top 5 facts about Smart Homes:

1. How to Set Up a Smart Home on a Budget?

Naturally, after reading all the above fantastic features of smart homes and smart home devices, it goes without saying that while you might be considering giving the technology a trial, you might be bothered or hesitant due to the costs that come with such an evolutionary change. However, you can set up a smart home, even if you’re on a small budget. You don’t need millions of pounds before you can control your household devices and appliances by using voice commands. Neither do you need billions to add a surveillance system to your house. With nearly £120, you can do these and even more. There is a group of products that can help you conveniently build a smart home without having to go broke or bankrupt. These include the Echo Dot, (3rd Generation) which is a smart speaker with Alexa, and costs approximately £39.99.

Philips Hue is the smart light bulb and is among the top most products for a Smart Home starting at just £14.99. It can be connected through a hub. It can also be used when the internet goes down.

2. What Does a Smart Home Do?

A smart home has a central system installed either on a mobile or some other device connected to the internet, which the user can use to create time schedules for certain changes to be effected. It also comes with skills that enable it to easily learn their homeowner’s schedules and also make the needed adjustments. A smart home is enabled with control for lighting and electricity to either reduce or increase electricity use. Some smart homes also alert the owners whenever there is any movement in the house, while the owners are away. There are even smarter homes that can call the police or fire department in case of emergencies.

3. How Much Bandwidth Does a Smart Home Use?

A good, strong, and stable reliable internet connection is probably the most important thing you need to successfully integrate your smart home devices and make your home a smart home. Most of the smart home devices do not necessarily require high bandwidth, and so they allow you to easily get away with your present internet speed. This implies that for some smart home devices, your present internet speed can cater to your devices’ connectivity requirement.

4. How to Protect a Smart Home?

As with every great invention, smart homes have a few downsides and the most important one is the security risk it poses. It could leave your entire home vulnerable to cybercriminals and hackers. This Is why you need to take extra precautions to protect your smart home. To start with, move your Wi-Fi router to a more secure router. Then, research the smart devices you want to get to ascertain that they won’t put your entire home at a huge risk.

5. What Does the Smart Home Hub Do?

The Smart Home Hub is the central gadget that is in charge of all your smart home devices. It is like the communication center for the internet of things (IoT) which connects all the devices within the home and enables them to communicate with one another and also easily communicate with you.

Smart Homes, while they may not be the present, yet they are undeniably the future. With the ease, convenience, and efficiency that smart homes promise, there’s every reason for almost every home to be upgraded into a smart home.


C&M Electrical Services have experience of over 25 years. Our team has extremely skilled professionals. Every work done is by a highly skilled team of NICEIC approved electricians who would reach you on time so as to deliver timely work. To provide peace of mind to the customers, passing a DBS check is a must for our electrical engineers. Electrical contracting services are provided to you in different sectors like commercial, industrial, and domestic. No matter where you require our services: at your home or at your business, we’ve got you covered.

Related Articles

Moving into a new home in the United Kingdom (UK) requires certain salient things to be put in place. While getting the perfect sitting arrangement and internal decoration is important, getting your domestic electrical wiring right is paramount as this pertains to the safety of life and property. This article takes you through what you need to know about carrying out a domestic electrical wiring and repair in your home and whether or not you need a registered electrician to get the job done.

What is Domestic Electrical Installation?

Law Insider defines domestic electrical installation as the construction or installation of electrical wiring and the permanent attachment or installation of electrical products in or on any structure that is not itself an electrical product.

However, this is not only limited to first time installation. The maintenance and repair of installed electrical wiring in dwellings is also covered in the scope of domestic electrical wiring or installation.

Domestic electrical installation itself is under the umbrella of Building Regulations and covers the design, installation, inspection and testing of domestic electrical wiring. Building Regulations in the UK got stricter in 2005 when all domestic electrical wiring and domestic electrical testing had to meet the requirements of Part P of the regulations. This includes whether the work was done by a professional or as DIY.

What Is Part P of the Building Regulations?

As stated above, UK residents have to ensure that any notifiable domestic electrical wiring installed after January 2005 complies with Part P of the new Building Regulations. According to Electrical Safety First, electrical wiring in a dwelling is notifiable to a local building control body where the work involves a low voltage or extra-low voltage (typically 230 V) circuit; replacing a fusebox/consumer unit; testing of an existing circuit in special locations (parts of bathrooms).

Non-notifiable work includes everything else such as additions or alterations to existing installations where new circuits are not required.

The Part P of the new Building Regulations is intended to keep families safe from fire, injury or electric shock that may come from the use, maintenance or alteration of the domestic electrical wiring in a dwelling. On April 6, 2013, amendments to the Part P requirements for England took effect.

On April 6, 2013, amendments to the Part P requirements for England took effect.

In the event that you have to sell your property, you would need to present your purchaser’s surveyors with evidence that notifiable domestic electrical wiring complies with Part P of the new Building Regulations.

The UK Ministry of Housing, Communities & Local Government (gov.uk) provides how to prove compliance. It states that the work must meet up with the applicable requirements of the Building Regulations and that the work on the building must be no more unsatisfactory before the domestic electrical wiring was carried out.

Part P regulations require that socket heights are a minimum of 450mm above floor level, while light switches must be a maximum height of 1.2m from the floor. This, however, does not apply to kitchens and garages.

It is also required that cables are run vertically or horizontally — not diagonally — across walls to sockets and switches. Also, fuseboards in domestic electrical wiring systems must be enclosed in a metal box — not plastic cases. This is as a result of the fact that substandard wiring can cause plastic enclosures to overheat and ignite. Hence, domestic electrical wiring must comply with Building Regulations of using non-combustible materials.

Domestic Electrical Wiring: RCDs, RCBOs & Circuits

The meter which belongs to the electricity board is where electrical systems start from. This is followed by your fuseboard then to the Residual Current Device (RCD), and then it is distributed to the dwelling’s circuits.

Residual Current Devices (RCD) help to halt the flow of electricity in situations where there is an imbalance of electric current from a circuit. When an RCD performs this, it is indicative of the fact that the power going into the circuit, flowing through and returning, is not stable. The importance of an RCD cannot be overemphasized, especially when putting into consideration the need to comply with the Building Regulations. RCDs can prevent instances of life-threatening electric shock.

UK domestic dwellings typically use single-phase supply. However, a three-phase supply is needed if what you’re installing has a high peak load. An inverter can be used to convert a single-phase supply to that of three-phase.

A three-phase supply, however, requires that you use an industrial fuseboard which costs more than the domestic version. Building Regulations also require that you use individual Residual Current Circuit Breakers (RCBOs) with overcurrent protection.

It is needful to have different circuits so that there are other options if one trips. There is also the need to prevent loading of circuits. There should be separate circuits for your lighting, sockets, oven, boiler, electric heater, as well as your heating system. Cable sizes determine the limit to how much load a circuit can take.

Domestic Electric Installation Condition Report

An Electrical Installation Condition Report (EICR), is a periodic inspection report on the safety of the fixed wiring in a domestic dwelling. This domestic electrical testing report has also been labelled as the ‘Landlord Safety Test’ or ‘Homebuyers Test’.

An EICR inspection in your home should be carried out every 10 years. Rented properties should have their domestic electrical testing conducted every 5 years or if a new tenant takes over the place. The EICR ensures that residents are kept safe from any electrical shocks or fires. The tests are conducted by highly qualified electricians.

There are two broad types of domestic EICR. The first is the visual condition report. Domestic electrical testing is not covered under this. This report is recommended for wiring that has recently been tested. The second which the periodic inspection report is more recommended as it is comprehensive and will test all your installations, even to the parts that you would often overlook. It should be noted that domestic dwellings before or during the 1960s are in serious need of EICR.

An effective EICR should find and report any electrical faults that could be hazardous; check electrical installations and wiring to ensure they meet Building Regulations; identify components that could cause electric shocks; keep records of the inspection for future purposes.

C&M electrical contractors provide you excellent and quality work in domestic electrical installation and repair. Our vision is to become the topmost household name in electricals. We assure you to provide all kinds of support you may be looking for. You can also expect timely service with high standards and at the best possible price in the midlands.

REFERENCES

Definition of Electrical Installations, https://www.lawinsider.com/dictionary/electrical-installations

Building regulations in England – Electrical Safety First, https://www.electricalsafetyfirst.org.uk/find-an-electrician/building-regulations/england/

Electrics: The Basics – Homebuilding & Renovating, https://www.google.com/amp/s/www.homebuilding.co.uk/amp/advice/electrics

https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/441872/BR_PDF_AD_P_2013.pdf

House wiring for beginners – DIY WIKI, http://wiki.diyfaq.org.uk/index.php/House_Wiring_for_Beginners

Moving into a new home in the United Kingdom (UK) requires certain salient things to be put in place. While getting the perfect sitting arrangement and internal decoration is important, getting your domestic electrical wiring right is paramount as this pertains to the safety of life and property. This article takes you through what you need to know about carrying out a domestic electrical wiring and repair in your home and whether or not you need a registered electrician to get the job done.

What is Domestic Electrical Installation?

Law Insider defines domestic electrical installation as the construction or installation of electrical wiring and the permanent attachment or installation of electrical products in or on any structure that is not itself an electrical product.

However, this is not only limited to first time installation. The maintenance and repair of installed electrical wiring in dwellings is also covered in the scope of domestic electrical wiring or installation.

Domestic electrical installation itself is under the umbrella of Building Regulations and covers the design, installation, inspection and testing of domestic electrical wiring. Building Regulations in the UK got stricter in 2005 when all domestic electrical wiring and domestic electrical testing had to meet the requirements of Part P of the regulations. This includes whether the work was done by a professional or as DIY.

What Is Part P of the Building Regulations?

As stated above, UK residents have to ensure that any notifiable domestic electrical wiring installed after January 2005 complies with Part P of the new Building Regulations. According to Electrical Safety First, electrical wiring in a dwelling is notifiable to a local building control body where the work involves a low voltage or extra-low voltage (typically 230 V) circuit; replacing a fusebox/consumer unit; testing of an existing circuit in special locations (parts of bathrooms).

Non-notifiable work includes everything else such as additions or alterations to existing installations where new circuits are not required.

The Part P of the new Building Regulations is intended to keep families safe from fire, injury or electric shock that may come from the use, maintenance or alteration of the domestic electrical wiring in a dwelling. On April 6, 2013, amendments to the Part P requirements for England took effect.

On April 6, 2013, amendments to the Part P requirements for England took effect.

In the event that you have to sell your property, you would need to present your purchaser’s surveyors with evidence that notifiable domestic electrical wiring complies with Part P of the new Building Regulations.

The UK Ministry of Housing, Communities & Local Government (gov.uk) provides how to prove compliance. It states that the work must meet up with the applicable requirements of the Building Regulations and that the work on the building must be no more unsatisfactory before the domestic electrical wiring was carried out.

Part P regulations require that socket heights are a minimum of 450mm above floor level, while light switches must be a maximum height of 1.2m from the floor. This, however, does not apply to kitchens and garages.

It is also required that cables are run vertically or horizontally — not diagonally — across walls to sockets and switches. Also, fuseboards in domestic electrical wiring systems must be enclosed in a metal box — not plastic cases. This is as a result of the fact that substandard wiring can cause plastic enclosures to overheat and ignite. Hence, domestic electrical wiring must comply with Building Regulations of using non-combustible materials.

Domestic Electrical Wiring: RCDs, RCBOs & Circuits

The meter which belongs to the electricity board is where electrical systems start from. This is followed by your fuseboard then to the Residual Current Device (RCD), and then it is distributed to the dwelling’s circuits.

Residual Current Devices (RCD) help to halt the flow of electricity in situations where there is an imbalance of electric current from a circuit. When an RCD performs this, it is indicative of the fact that the power going into the circuit, flowing through and returning, is not stable. The importance of an RCD cannot be overemphasized, especially when putting into consideration the need to comply with the Building Regulations. RCDs can prevent instances of life-threatening electric shock.

UK domestic dwellings typically use single-phase supply. However, a three-phase supply is needed if what you’re installing has a high peak load. An inverter can be used to convert a single-phase supply to that of three-phase.

A three-phase supply, however, requires that you use an industrial fuseboard which costs more than the domestic version. Building Regulations also require that you use individual Residual Current Circuit Breakers (RCBOs) with overcurrent protection.

It is needful to have different circuits so that there are other options if one trips. There is also the need to prevent loading of circuits. There should be separate circuits for your lighting, sockets, oven, boiler, electric heater, as well as your heating system. Cable sizes determine the limit to how much load a circuit can take.

Domestic Electric Installation Condition Report

An Electrical Installation Condition Report (EICR), is a periodic inspection report on the safety of the fixed wiring in a domestic dwelling. This domestic electrical testing report has also been labelled as the ‘Landlord Safety Test’ or ‘Homebuyers Test’.

An EICR inspection in your home should be carried out every 10 years. Rented properties should have their domestic electrical testing conducted every 5 years or if a new tenant takes over the place. The EICR ensures that residents are kept safe from any electrical shocks or fires. The tests are conducted by highly qualified electricians.

There are two broad types of domestic EICR. The first is the visual condition report. Domestic electrical testing is not covered under this. This report is recommended for wiring that has recently been tested. The second which the periodic inspection report is more recommended as it is comprehensive and will test all your installations, even to the parts that you would often overlook. It should be noted that domestic dwellings before or during the 1960s are in serious need of EICR.

An effective EICR should find and report any electrical faults that could be hazardous; check electrical installations and wiring to ensure they meet Building Regulations; identify components that could cause electric shocks; keep records of the inspection for future purposes.

C&M electrical contractors provide you excellent and quality work in domestic electrical installation and repair. Our vision is to become the topmost household name in electricals. We assure you to provide all kinds of support you may be looking for. You can also expect timely service with high standards and at the best possible price in the midlands.

REFERENCES

Definition of Electrical Installations, https://www.lawinsider.com/dictionary/electrical-installations

Building regulations in England – Electrical Safety First, https://www.electricalsafetyfirst.org.uk/find-an-electrician/building-regulations/england/

Electrics: The Basics – Homebuilding & Renovating, https://www.google.com/amp/s/www.homebuilding.co.uk/amp/advice/electrics

https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/441872/BR_PDF_AD_P_2013.pdf

House wiring for beginners – DIY WIKI, http://wiki.diyfaq.org.uk/index.php/House_Wiring_for_Beginners